| FRONT BRAKE CABLES 1955-69 |
| 34 11 2 072 344 |
*1955-69 Twins - 130cm Long |
$17.95 |
| 34 11 2 072 346 |
*All Twins - 145cm |
15.95 |
| 34 11 2 072 236 |
All Singles |
15.55 |
| CHOKE CABLES |
| 1981-on |
| 32 73 2312 152 |
R1100 |
$14.66 |
| 32 73 1 242 594 |
R100/7 R/100RT USA Upper/ 764mmR65/R100/R80ST/GS/ All 1985-on Boxers |
13.59 |
| 32 73 1 242 593 |
All 1980-on 800/1000cc thru 1984 & R65/R80 1985-on 671mm Europa Upper |
13.59 |
| 32 73 1 242 139 |
1000cc 40mm Lower/1985-on R65/R80 |
7.79 |
| 32 73 1 242 138 |
R80/7 498mm Lower & All 1985-on Boxer |
8.79 |
| 32 73 1 242 591 |
R65 Europa Upper & 1987-on Boxer |
10.39 |
| 32 73 1 242 136 |
R65 Right Lower |
9.59 |
| 32 73 1 242 137 |
R65 Left Lower |
9.59 |
| 32 73 1 451 637 |
K100RS/K75/S/C |
12.43 |
| 32 73 1 451 638 |
K100 /K100RT/K75RT & High Bar 11/1979 to 1980 Only |
12.58 |
| 32 73 1 240 798 |
R100S/R100RS Upper |
14.66 |
| 32 73 1 240 799 |
R80/7/R100/7/R100RT Upper |
14.66 |
| 32 73 1 240 817 |
All lower |
14.04 |
| 1970 THRU 11/1979 |
| 13 23 1 255 976 |
Left R75/5 Thru RT/R65 (One nipple only - stiff wire) |
5.30 |
| 13 23 1 255 977 |
Right R75/5 Thru RT/R65 (One nipple only - stiff wire) |
5.30 |
| 13 23 1 252 826 |
Left (nipples both ends) |
5.72 |
| 13 23 1 252 827 |
Right (nipples both ends) |
5.30 |
| 13 23 1 260 644 |
R90S |
5.72 |
| 13 23 1 260 365 |
Left R60/6/7 |
5.72 |
| 13 23 1 260 366 |
Right R60/6/7 |
5.72 |
| CABLE KITS - A GREAT WAY TO BUY YOUR CABLES! |
| 1970-1980 |
BMW Original |
$56.95 |
| A complete turn-key kit. Each kit contains 2 throttle, 1 clutch and 1 brake cable (except R27/27 and R65). USA cables are longer for the higher USA handlebar. Europa cables are shorter for the lower Europa handlebar. The best way to prevent broken and frayed cables is to replace them. Treat your BMW to a new cable set. |
| 041-515-610 |
R50/5 and R60/5 Europa |
| 042-515-611 |
R50/5 and R60/5 USA |
| 041-515-612 |
R75/5 Europa |
| 042-515-613 |
R75/5 USA |
| 098-515-610 |
R60/6 Europa 1974-75 Drum Brake Only |
| 099-515-611 |
R60/6 USA 1974-75 Drum Brake Only |
| 098-856-610 |
R60/6 Europa 1976 Drum Brake Only |
| 099-856-611 |
R60/6 USA 1976 Drum Brake Only |
| 098-857-610 |
R60/6/7 Europa 1976-on Disc Brake Only |
| 099-857-611 |
USA Disc Brake Only R-60/7 |
| 098-400-612 |
R75/6 and R90/6 Europa 1974-75 |
| 099-400-613 |
R75/6 and R90/6 USA 1974-75 |
| 098-400-617 |
R90S Europa only 1974-75 |
| 098-857-617 |
R90S Europa only 1976 |
| 098-857-612 |
R75/6/7, R90/6, R100/7 1976-78 and R80/7 1978-80 Europa |
| 099-857-613 |
R75/6/7, R90/6, R100/7 1976-78 and R80/7 1978-80 USA |
| 098-857-615 |
R100/7 Europa 1979-80 and all R100S |
| 099-857-616 |
R100/7 USA 1979-80 |
| 098-739-616 |
R100RS |
| 744-809-616 |
R100RT |
| 694-692 |
R65 USA thru 1980 |
36.35 |
| 693-691 |
R65 Europa thru 1980 |
36.35 |
| CABLE TIES |
| 61 13 1 243 091 |
200mm |
$0.26 |
| 61 13 1 243 092 |
275mm |
.36 |
| FINAL DRIVE |
| LM 47 |
Rear Drive Spline Lubricant (80g tube) |
$6.25 |
| RING AND PINION GEAR SET |
| Ring and pinion gear ratios are determined by the number of teeth on the ring gear and pinion gear. The ratio is stamped on top of swing arm near oil filler plug. Ratio can also be determined for 1974-on models by the four-digit code on speedometer (in parentheses). You may also divide the number of teeth on pinion gear by the number of teeth on ring geare.g. 37/11=3.36. All 1970-84 gear sets are interchangeable. If you change to a different ratio from original, you should also make appropriate speedo change. |
| These precision machined gears are only available in matched sets. Individual ring or pinion gears are NOT available. |
| 33 12 1 451 713 |
K75/K100 2.81 Ratio |
$429.95 |
| 33 12 1 451 712 |
K75/K100 2.91 Ratio |
429.95 |
| 33 12 1 451 711 |
K75/K100 3.0 Ratio |
429.95 |
| 1985-ON TWINS985-ON TWINS |
| 33 12 1 452 223 |
R65/R80 3.36 Ratio |
$333.32 |
| 33 12 1 452 224 |
R65/R80 3.2 Ratio |
312.52 |
| 33 12 1 457 556 |
R80G/S 3.2 Ratio |
567.32 |
| 33 12 1 452 572 |
R100GS 3.09 Ratio |
660.35 |
| 33 12 1 454 707 |
1987-on 100RS/RT 3.0 Ratio |
395.72 |
| 1070-84 BOXER SETS1970-84 BOXER TWINS |
| 33 12 1 233 290 |
2.91 Ratio (1.078) R75/5 thru R100S/RS/RT |
$660.35 |
| 33 12 1 233 292 |
3.00 Ratio (1.112) R90S |
660.35 |
| 33 12 1 233 286 |
3.09 Ratio (1.144) R90/6 |
511.16 |
| 33 12 1 233 287 |
3.20 Ratio (1.186) R75/5/6 |
465.40 |
| 33 12 1 233 288 |
3.36 Ratio (1.244) R60/6, R75/6/7/R80/7 |
635.50 |
| 33 12 1 238 671 |
3.44 Ratio (1.276) R65 |
635.50 |
| 33 12 1 233 289 |
3.56 Ratio (1.1318) R50/5/R60/6/ R65/R65LS |
635.50 |
| REAR END HOUSING |
| 33 11 1 230 232 |
1970-80 |
$519.48 |
| 33 11 1 232 196 |
Cover For Housing |
97.86 |
| GASKET/SEAL SET |
| Each set contains Cardan gasket, Cardan seal, spacer sleeve seal, and driveshaft seal-(where applicable)--all the parts necessary to re-seal. Play it safe, replace all the seals. |
| 33 11 1 451 185-Z |
K75/100 |
$35.62 |
| 33 11 1 000 000 |
1985-on Boxers |
33.23 |
| 33 11 1 242 000 |
1981-84 |
20.75 |
| 33 12 1 230 000 |
1970-80 |
19.95 |
| 33 12 3 004 000 |
1955-69 Twins |
22.95 |
| GASKETS |
| 33 11 1 451 182 |
K Cardan O-Ring |
$5.46 |
| 33 11 1 242 788 |
Cardan 1981-on Boxers |
5.15 |
| 33 11 1 234 176 |
Cardan 1970-78 |
2.03 |
| 33 11 3 004 320 |
Cardan 1961-69 Twins |
3.64 |
| 33 11 3 004 319 |
Cardan 1955-60 Twins |
2.03 |
| 33 17 1 230 287 |
Swingarm 1970-on |
1.30 |
| 33 53 3 054 266 |
Swingarm 1955-69 Twins |
2.08 |
| SEALS |
| 33 12 1 241 619 |
All 1985-on 85x110x10 |
$22.83 |
| 33 12 3 004 343 |
65x85x10 Cardan all 1955-84 Boxers |
4.42 |
| 33 12 3 004 337 |
30x42x7 Spacer Sleeve all 1955-on |
5.72 |
| 33 12 1 230 356 |
28x55x9 Drive Shaft all 1970-on |
4.63 |
| 33 12 3 038 257 |
28x47x10 Drive Shaft 1955-69 Twins |
11.38 |
| 33 11 1 451 185 |
Pinion Seal K75/100 |
4.94 |
| REAR END BEARINGS |
| 33 12 1 232 771 |
Tapered 1970-on 3305 |
$51.48 |
| 33 12 1 451 751 |
K75/K100 |
73.32 |
| 33 12 1 451 188 |
Tapered Roller K75/K100 |
23.40 |
| 33 12 1 452 214 |
Tapered (32005X) 1985-on |
18.20 |
| 33 12 1 236 995 |
Needle 1981-on 15x30x18 |
13.00 |
| 33 12 1 230 244 |
Needle 1970-80 15x32x17 |
20.75 |
| 33 12 1 242 738 |
Grooved Needle all 1955-84 Twins 32x47x24.5 |
44.20 |
| 33 12 1 242 210 |
All 1985-on 85x120x18 |
127.30 |
| 07 11 9 981 760 |
Large Grooved all 1955-84 |
44.93 |
| 07 11 9 982 468 |
Tapered 1955-69 3304 |
139.88 |
| COMPLETE REAR END BEARING KITS |
| 4 BEARINGS PER KIT |
| 33 12 1 236 995-Z |
1981-84 |
$152.83 |
| 33 12 1 230 224-Z |
1970-80 |
161.15 |
| COUPLING HUB |
| 33 12 1 233 303 |
1974-on except K Models |
$65.00 |
| 33 12 1 230 255 |
1970-73 |
66.51 |